Local manager

Technical Library | Support

Go to the table of contents

Go to the previous page

Go to the next page

View or print as PDF

Configuration Files > records.config > Local manager

Help | Content Gateway | Version 8.1.x

Configuration Variable

proxy.config.lm.sem_id

Specifies the semaphore ID for the local manager.

Note: Do not change the value of this variable.

proxy.local.cluster.type

Sets the clustering mode:

2 = management-only mode

3 = no clustering

proxy.config.cluster.
rsport

Specifies the reliable service port. The reliable service port is used to send configuration information between the nodes in a cluster. All nodes in a cluster must use the same reliable service port.

proxy.config.cluster.
mcport

Specifies the multicast port. The multicast port is used for node identification. All nodes in a cluster must use the same multicast port.

proxy.config.cluster.
mc_group_addr

Specifies the multicast address for cluster communications. All nodes in a cluster must use the same multicast address.

proxy.config.cluster.
mc_ttl

Specifies the multicast Time-To-Live for cluster communications.

proxy.config.cluster.
log_bogus_mc_msgs

Enables (1) or disables (0) logging of invalid multicast messages.

proxy.config.admin.
html_doc_root

Specifies the document root for the Content Gateway manager.

proxy.config.admin.
web_interface_port

Specifies the Content Gateway manager port.

proxy.config.admin.
autoconf_port

Specifies the autoconfiguration port.

proxy.config.admin.
overseer_port

Specifies the port used for retrieving and setting statistics and configuration variables. This port is disabled by default.

proxy.config.admin.
admin_user

Specifies the administrator ID that controls access to the Content Gateway manager.

proxy.config.admin.
admin_password

Specifies the encrypted administrator password that controls access to the Content Gateway manager. You cannot edit the password; however, you can specify a value of NULL to clear the password.

See Accessing the Content Gateway manager if you forget the master administrator password.

proxy.config.admin.
use_ssl

Enables the Content Gateway manager SSL option for secure communication between a remote host and the Content Gateway manager.

proxy.config.admin.
ssl_cert_file

Specifies the filename of the SSL certificate installed on the Content Gateway system for secure communication between a remote host and the Content Gateway manager.

proxy.config.admin.
number_config_bak

Specifies the maximum number of copies of rolled configuration files to keep.

proxy.config.admin.user_id

Specifies the non-privileged user account designated to Content Gateway.

proxy.config.admin.
ui_refresh_rate

Specifies the refresh rate for the display of statistics in the Monitor pages of the Content Gateway manager.

proxy.config.admin.
log_mgmt_access

Enables (1) or disables (0) logging of all Content Gateway manager transactions to the lm.log file.

proxy.config.admin.
log_resolve_hostname

When enabled (1), the hostname of the client connecting to the Content Gateway manager is recorded in the lm.log file.

When disabled (0), the IP address of the client connecting to the Content Gateway manager is recorded in the lm.log file.

proxy.config.admin.
subscription

proxy.config.admin.
supported_cipher_list

AES128-SHA, DHE-RSA-AES128-SHA, DHE-DSS-AES128-SHA, DES-CBC3-SHA, EDH-RSA-DES-CBC3-SHA, EDH-DSS-DES-CBC3-SHA

A comma-separated list, no spaces, of ciphers supported by Content Gateway.

No validation is performed on the string.

proxy.config.lm.
display_reset_alarm

When enabled (1), email is sent to the administrator (proxy.config.alarm_email) whenever Content Gateway resets.

proxy.local.install.type

Indicates that Content Gateway is installed as a component of TRITON AP-WEB (1) or TRITON AP-DATA without TRITON AP-WEB (2)

Go to the table of contents

Go to the previous page

Go to the next page

View or print as PDF

Configuration Files > records.config > Local manager

Copyright 2016 Forcepoint LLC. All rights reserved.