Running in explicit proxy mode

If you have an existing PAC file, replace the proxy.pac file located in the Content Gateway config directory (default location is /opt/WCG/config) with the existing file. If you do not have a PAC file already, see Step 4 below for a script you can use as a basis for building a custom PAC file.

On the Configure > My Proxy > Basic > General tab, ensure that HTTPS is enabled. If it is disabled, set it to On, click Apply, and Restart Content Gateway.

Go to Configure > Content Routing > Browser Auto-Config > PAC.

In the Auto-Configuration Port field, specify the port that the proxy uses to serve the PAC file. The default port is 8083.

The PAC Settings area displays the proxy.pac file:

If you copied an existing PAC file into the Content Gateway config directory, the proxy.pac file contains your proxy configuration settings. Check the settings and make changes if necessary.

If you did not copy an existing PAC file into the Content Gateway config directory, the proxy.pac file is empty. Copy and paste the following script for your PAC settings. You must provide the proxy domain name or IP address. This template is for basic testing only. Further modify this file to meet all of your organization's needs.

function FindProxyForURL(url, host)

{

url = url.toLowerCase();

host = host.toLowerCase();

if(url.substring(0, 5) == "http:"){

return "PROXY WCG_DOMAIN_NAME_or_IP_Address:8080";

}

else if(url.substring(0, 4) == "ftp:"){

return "PROXY WCG_DOMAIN_NAME_or_IP_Address:2121";

}

else if(url.substring(0, 6) == "https:"){

return "PROXY WCG_DOMAIN_NAME_or_IP_Address:8080";