|
|
|
|
Security > Content Gateway user authentication > Integrated Windows Authentication
|
|
In the Content Gateway manager, enable Integrated Windows Authentication on the Configure > My Proxy > Basic page and click Apply.
|
|
|
Join Content Gateway to the Windows domain. See Configuring Integrated Windows Authentication for a list of required conditions.
|
|
1.
|
Go to Configure > My Proxy > Basic > General. In the Authentication section, click Integrated Windows Authentication On, and click Apply.
|
|
a.
|
In the Domain Name field, enter the fully qualified domain name.
|
|
b.
|
In the Administrator Name field enter the Windows Administrator user name.
|
|
c.
|
In the Administrator Password field enter the Windows Administrator password.
|
|
e.
|
In the Content Gateway Hostname field, confirm that the hostname is the correct hostname and that it is no more than 15 characters (no more than 11 characters on V-Series appliances). If it is longer, it must be shortened if IWA is to be used. The length restriction results from the 15 character limit on NetBIOS hostnames.
|
|
f.
|
Click Join Domain. If there is an error, ensure that the conditions outlined above are met and then see Failure to join the domain.
|
|
g.
|
|
1.
|
Navigate to the Configure > Security > Access Control > Integrated Windows Authentication tab and click Unjoin.
|
|
2.
|
To join a new domain, in the Domain Name field, enter the fully qualified domain name.
|
|
3.
|
In the Administrator Name field enter the Windows Administrator user name.
|
|
4.
|
In the Administrator Password field enter the Windows Administrator password. The name and password are used only during the join and are not stored.
|
|
6.
|
Click Join Domain.
|
|
1.
|
Navigate to the Configure > Security > Access Control > Integrated Windows Authentication tab.
|
|
2.
|
In the Domain Controller section, select how to locate the domain controller:
|
|
3.
|
Click Apply.
|
|
|
|
|
|
Security > Content Gateway user authentication > Integrated Windows Authentication
|
