Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Setting Up Forcepoint Appliances
Setting Up Forcepoint Appliances
Deployment and Installation Center | Web and Email Protection Solutions
 
Applies to:                                                                                                          
*
Forcepoint Appliances, v8.5.x
*
Forcepoint Web Security and Forcepoint URL Filtering, v8.5.x
*
Forcepoint Email Security, v8.5.x
A Forcepoint appliance is a component of a complete Forcepoint security deployment.
Setting up a deployment consists of five core tasks:
1.
Deployment planning and preparation
2.
Appliance hardware setup and/or virtual appliance creation
3.
Initial configuration: the firstboot wizard
4.
Post-firstboot appliance configuration in the command line interface (CLI)
5.
Installation and configuration of off-appliance components
Forcepoint appliance setup is described in detail in Forcepoint Appliances Getting Started.
Forcepoint V Series and X Series appliances come with a hardware Quick Start poster packaged in the shipping container. The 2-page poster explains how to set up the hardware and cable the appliance to your network. You can also access the posters online.
*
V5000 G2/G3 poster
*
V5000 G4 poster
*
V5000 G4 poster for Forcepoint DLP
*
V10000 G3 poster
*
V10000 G4 poster
*
V10K G4R2/V20K G1 poster
*
X10G G1/G2 poster
 
 
* 
Important 
Some older V10000 and V5000 appliances are not supported with versions of 8.0 and higher.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Setting Up Forcepoint Appliances
Copyright 2022 Forcepoint. All rights reserved.