Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuring System Settings > Managing domain and IP address groups > Adding an IP address group
Adding an IP address group
Administrator Help | Forcepoint Email Security | Version 8.5.x
The page Settings > Inbound/Outbound > IP Groups is used to view and add an IP address group.
Add a new IP address group
1.
On the page Settings > Inbound/Outbound > IP Groups, click Add.
The Add IP Group page displays.
2.
In the field IP Address Group Name, enter a name for the new IP address group.
This field is required.
3.
In the field Description, enter a brief description of the IP address group.
4.
In the section IP Address Group, add a predefined IP address group; from the field IP address file, click Browse and navigate to the desired text file.
The file format should be one IP address per line, and its maximum size is 10 MB
 
* 
Note 
The default Encryption Gateway IP address group supports only the entry of individual IP addresses. Subnet address entries are considered invalid and are not accepted for this IP address group.
Subnet addresses may be entered for other default and custom IP address groups.
5.
Manually add IP address entries; in the field IP address, enter an individual IP address and click >.
The information is added to the Added IP Addresses box on the right.
6.
Click OK.
The settings are saved.
Export an IP address group
*
From the section Added IP Addresses, click Export.
The list of IP address entries in the group is exported to your local drive as a text file.
Remove an entry from the IP address group
*
From the section Added IP Addresses, select an individual entry and click Remove.
The entry is removed.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuring System Settings > Managing domain and IP address groups > Adding an IP address group
Copyright 2022 Forcepoint. All rights reserved.