Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuring content security
Administrator Help | Forcepoint Web Security | v8.5.x
Related topics:
Content Security performs web page content analysis to discover security threats and malicious code in HTTP and HTTPS content (HTTPS when Content Gateway SSL support is enabled).
Use the Settings > Scanning > Scanning Options page to enable and configure content security.
1.
Select Off to disable content analysis.
2.
Select On (default) to enable content analysis for uncategorized sites and sites with elevated risk profiles, as identified by Forcepoint Security Labs.
3.
Select Aggressive analysis to analyze content from sites with elevated risk profiles and also sites with lower risk profiles. This option consumes additional system resources.
4.
When you are finished, click OK to cache your changes. Changes are not implemented until you click Save and Deploy.
Use the Settings > Scanning > Scanning Exceptions page to specify untrusted or trusted sites that are always analyzed or never analyzed (Configuring exceptions to Content Gateway analysis).
Content analysis sensitivity is tuned by Forcepoint Security Labs to provide the best results for most organizations. However, if the Optimized setting does not produce the results you expect, you can adjust the sensitivity in the Content Gateway advanced analysis options section.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Copyright 2018 Forcepoint. All rights reserved.