Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Transparent Proxy and ARM > Transparent interception strategies > Transparent interception with WCCP v2 devices > WCCP v2 setup outline
WCCP v2 setup outline
Help | Content Gateway | v8.4.x
1.
Install and configure your WCCP v2 devices.
On each WCCP v2 device:
*
Configure the service groups.
*
Configure password security, if needed.
*
Configure multicast communication, if needed.
See Configuring WCCP v2 routers.
2.
Configure Content Gateway to work with your WCCP devices.
*
Define matching service groups.
In addition to network interface, protocols, ports, authentication (if used), and multicast communication (if used), also configure:
*
The IP addresses of the WCCP v2 devices.
*
The Packet Forward Method and Packet Return Method.
*
If Content Gateway is deployed in a cluster, assignment method load distribution, if desired.
*
Create ARM redirect rules for non-standard ports.
See Enabling WCCP v2 in Content Gateway and The Content Gateway ARM.
3.
Validate the configuration with test traffic.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Transparent Proxy and ARM > Transparent interception strategies > Transparent interception with WCCP v2 devices > WCCP v2 setup outline
Copyright 2017 Forcepoint. All rights reserved.