Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Network Configuration > Verifying Network Agent configuration
Verifying Network Agent configuration
Web Security Help | Web Security Solutions | Version 7.8.x
After configuring Network Agent in the Web Security manager, you can use any third-party packet analyzer to ensure that computers on your network are visible to your Web Security solution.
Make sure that the network card that you have configured as the Network Agent monitoring NIC can see traffic from IP addresses in all network segments that the Network Agent instance has been configured to monitor. (This configuration is done on the Local Settings > NIC Configuration > Monitor List page. See Configuring monitoring settings for a NIC.)
If packets from some IP addresses are not visible to the monitoring NIC:
*
Review the network configuration and NIC placement requirements (see the Deployment and Installation Center or Network Agent Quick Start)
*
Verify that you have properly configured the monitoring NIC (Configuring NIC settings).

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Network Configuration > Verifying Network Agent configuration
Copyright 2016 Forcepoint LLC. All rights reserved.