Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configure the Hybrid Service > Define filtered locations
Define filtered locations
Web Security Help | Web Security Solutions | Version 7.8.x
Related topics:
Use the Settings > Hybrid Configuration > Filtered Locations page to review, add, or edit information about the locations whose user requests are sent to the hybrid service.
A filtered location is the external IP address, IP address range, or subnet from which Internet requests appear to originate when seen by the hybrid service. In Web Security Gateway Anywhere deployments, hybrid policy enforcement can be applied to off-site users, regardless of how requests from those users are managed when they are in-network.
*
Because the hybrid service is hosted outside your network, any locations managed by the hybrid service must be external addresses, visible from the Internet. Locations managed by the hybrid service:
*
*
*
These locations are NOT:
*
*
*
If you are using the PAC file generated by the hybrid service, this configuration occurs automatically based on the settings that you provide on the Filtered Locations page. Specify that these users are managed by local Websense software and define whether their on-premise policy enforcement is through a firewall-integrated or transparent proxy (for example, Content Gateway in transparent mode), or an explicit proxy. If Internet requests from in-network machines at a specified location pass through an explicit proxy, you provide the proxy location (hostname or IP address) and port to ensure requests are routed properly for users at that location.
Each location that you define appears in a table that combines a name and description with technical configuration details, including the selected proxy mode, the type of location (single IP address, IP address range, or subnet), and the actual external IP address or addresses from which requests originate.
*
*
*
*
If you have added or edited a location entry, click OK to cache your changes. Changes are not implemented until you click Save and Deploy.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configure the Hybrid Service > Define filtered locations
Copyright 2016 Forcepoint LLC. All rights reserved.