Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Adding or editing protocol identifiers
Web Security Help | Web Security Solutions | Version 7.8.x
Use the Filter Components > Edit Protocols > Add Protocol Identifier page to define additional protocol identifiers for an existing custom protocol. Use the Edit Protocol Identifier page to make changes to a previously-defined identifier.
Before creating or changing an identifier, verify that the correct protocol name appears next to Selected Protocol.
When working with protocol identifiers, remember that at least one criterion (port, IP address or transport type) must be unique for each protocol.
1.
Specify which Ports are included in this identifier.
*
If you select All Ports, that criterion overlaps with other ports or IP addresses entered in other protocol definitions.
*
*
You can configure Network Agent to ignore these ports in conjunction with a Websense Web Security Gateway deployment.
Since custom protocols take precedence over Websense protocols, if you define a custom protocol using port 80, all other protocols that use port 80 are filtered and logged like the custom protocol.
2.
Specify which IP Addresses are included in this identifier.
*
If you select All external IP addresses, that criterion overlaps with any other IP addresses entered in other protocol definitions.
*
3.
Specify which Protocol Transport method is included in this identifier.
4.
Click OK to cache your changes and return to the Edit Protocols page. Changes are not implemented until you click Save and Deploy.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Copyright 2016 Forcepoint LLC. All rights reserved.