Configuring Content Gateway to be a collation server

Support

Go to the table of contents

Go to the previous page

Go to the next page

Go to the index

View or print as PDF

Working With Log Files > Collating event log files > Configuring Content Gateway to be a collation server

Configuring Content Gateway to be a collation server

Help | Content Gateway | Version 7.7.3

1.	Navigate to Configure > Subsystems > Logging > Collation.

2.	In the Collation Mode section, enable the Be A Collation Server option.

3.	In the Log Collation Port field, enter the port number used for communication with collation clients. The default port number is 8085.

4.	In the Log Collation Secret field, enter the password used to validate logging data and prevent the exchange of arbitrary information.


	Note All collation clients must use this same secret.

5.	Click Apply.


	Important If you modify the collation port or secret after connections between the collation server and collation clients have been established, you must restart Content Gateway.

Go to the table of contents

Go to the previous page

Go to the next page

Go to the index

View or print as PDF

Working With Log Files > Collating event log files > Configuring Content Gateway to be a collation server