ICAP

Support

Go to the table of contents

Go to the previous page

Go to the next page

Go to the index

View or print as PDF

Configuration Options > Networking > ICAP

ICAP

Help | Content Gateway | Version 7.7.3


	Note The ICAP configuration option appears on the Configure pane only if you have enabled ICAP in the Features table on the Configure > My Proxy > Basic > General tab.

ICAP provides an alternate interface to Websense Data Security and other data security services that are ICAP-conversant. A primary and backup URI can be specified, and failover and load balancing can be configured. See Configuring the ICAP client and the subsection for ICAP failover and load balancing.


Option	Description
ICAP Service URI	Specifies the Uniform Resource Identifier for the ICAP service. The format is: icap://hostname:port/path For example: icap://ICAP_machine:1344/REQMOD The default ICAP port is 1344. If you are using the default port, you need not specify it in the URI. An optional secondary URI service can be specified immediately after the first by adding a comma and the URI of the second service, no spaces.
Analyze HTTPS Content	Select whether decrypted traffic should be sent to Data Security Suite for analysis or sent directly to the destination.
Analyze FTP Uploads	Select whether to send FTP upload requests to Websense Data Security Suite for analysis. The FTP proxy feature must be enabled. See FTP.
Action for Communication Errors	Select whether to allow traffic or send a block page if Content Gateway receives an error while communication with Websense Data Security Suite.
Action for Large files	Select whether to allow traffic or send a block page if a file larger than the size limit specified in DSS is sent. The default size limit in DSS is 12 MB.

Go to the table of contents

Go to the previous page

Go to the next page

Go to the index

View or print as PDF

Configuration Options > Networking > ICAP