Documentation
|
Support
Example device configuration
Example device configuration
Forcepoint GRE Guide | Forcepoint Web Security Cloud and Hybrid Solutions
This section provides an example GRE configuration for the following devices:
Cisco ISR
(version 12.4 and higher)
Juniper SRX
(version 12.1 R2 and higher)
The table below details the abbreviations used in the configuration examples. Replace these with the appropriate IP addresses for your configuration.
IP address
Description
Abbreviation used
Primary point of presence public IP
Public IP address of the Forcepoint point of presence used for your primary tunnel.
<primary_dc_public_ip>
Primary local inner tunnel IP
Inner IP address for the local (edge device) end of the primary tunnel.
<primary_local_inner_ip>
Primary remote inner tunnel IP
Inner IP address for the remote (point of presence) end of the primary tunnel.
<primary_remote_inner_ip>
Secondary point of presence public IP
Public IP address of the Forcepoint point of presence used for your secondary tunnel.
<secondary_dc_public_ip>
Secondary local inner tunnel IP
Inner IP address for the local (edge device) end of the secondary tunnel.
<secondary_local_inner_ip>
Secondary remote inner tunnel IP
Inner IP address for the remote (point of presence) end of the secondary tunnel.
<secondary_remote_inner_ip>
Edge device public IP
The public egress IP address for your edge device.
<device_egress_ip>
Client subnet IP
IP address range for the internal subnet whose traffic will be forwarded to the tunnel.
<client_subnet>
Gateway IP
The IP address of your internet gateway.
<gateway_ip>
Example device configuration
Copyright 2022 Forcepoint. All rights reserved.