Directing user traffic to the cloud service

Use the Default Pac file addresses on the Web > Settings > General page to get the information you need to use a PAC file to direct user traffic from your network to the cloud service.

Perform the following steps on a machine that is inside the network that you defined as a connection in the previous step. This may optionally be the same machine that you are using.

Configure Chrome to use the PAC file

Open Chrome on the selected machine.

Open the Settings menu.

Click the Advanced Settings link, then scroll down to the Network section.

Click Change proxy settings. This opens an Internet Explorer dialog box to the Connections tab.

Click LAN Settings.

Mark the Use automatic configuration script check box, then paste the URL from the portal page in the address field.

Click OK twice to close the dialog box.

Configure Internet Explorer to use the PAC file

Open Internet Explorer on the selected machine.

Open the Internet options menu.

Select the Connections tab, then click LAN Settings.

In the settings dialog box, mark the Use automatic configuration script check box and paste the URL from the portal page in the address field.

Click OK twice to close the dialog box.

Configure Firefox to use the PAC file

Open Firefox on the selected machine.

Open the Options menu.

Select the Advanced > Network tab.

Click Settings, in the Connection section at the top of the tab.

Select Automatic proxy configuration URL and paste in the URL from the portal page.

Click OK.