Traffic shaping options

Administrator Help | TRITON AP-EMAIL | Version 8.2.x

The Settings > Inbound/Outbound > Traffic Shaping screen lets you determine the rate of traffic delivery for a specified source or destination group based on domain group or user directory settings. For example, these settings allow you to send large volumes of email at a rate that prevents possible blacklisting of the domain.

Change the order of a traffic shaping group by marking its associated check box and using the Move Up and Move Down buttons. Copy an existing traffic shaping group by marking its associated check box and clicking Copy. You can delete a traffic shaping group by marking its associated check box and clicking Delete.

In addition to specifying source and destination user groups, the following message delivery settings may be modified as part of traffic shaping:

Maximum number of concurrent connections

Maximum number of messages per connection within a designated time period

Maximum number of recipients per message

Use of the SMTP session cache, for which the maximum number of messages per session and the session duration are specified

The default traffic shaping group contains no traffic source or destination user groups.

Click Add and use the following steps to establish message traffic shaping controls in your system:

Name your traffic shaping group.

Specify the location in which you want this group to appear in the traffic shaping group list by selecting it in the Order drop-down list.

Select the status of your traffic shaping group: Active or Disabled.

Configure an email source traffic shaping group, if desired. Designate 1 of the following source types:

All sources

Domain group (default selection). Select the domain group from the drop-down list. Modify the selected domain group by clicking Edit.

User directory. Select a user directory from the list, or create a new user directory by clicking Add user directory.

Configure an email destination traffic shaping group, if desired. Designate 1 of the following destination types:

All destinations

Domain group (default selection). Select the domain group from the drop-down list. Modify the selected domain group by clicking Edit.

User directory. Select a user directory from the list, or create a new user directory by clicking Add user directory.

Enter the maximum number of simultaneous message deliveries to an individual routing address in the Maximum number of concurrent connections field. Range of values is 5 - 50; default value is 20.

Enter the maximum number of messages per connection within a defined time period in the Maximum number of messages per connection field. Number of messages range is 1 - 10000; default value is 10000. Time range is 60 seconds to 30 minutes; default value is 60 seconds.

Enter the maximum number of message recipients per message delivery in the Maximum number of recipients field. Range of values is 5 - 100; default value is 50.

If you want to use an SMTP session cache, mark the Enable SMTP session cache check box (default setting).

Specify the maximum number of messages allowed per SMTP session. Range of values is 5 - 100; default is 10. You can enter zero (0) to specify an unlimited number of messages per session.

Specify the duration of the SMTP session, in seconds. Range of values is 60 - 600 seconds; default value is 300 seconds.