Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Integrating Forcepoint URL Filtering with Cisco > Cisco IOS executable commands
Cisco IOS executable commands
Deployment and Installation Center | Forcepoint URL Filtering
 
Applies to:                                         
*
Forcepoint URL Filtering, v8.5.x
These Cisco IOS router commands allow you to view configuration data and communication statistics. These settings cannot be saved into the startup configuration.
show ip urlfilter config
Shows configuration information, including maximum number of requests, allowmode state, and list of configured Filtering Service instances.
Technical Support typically requests this information when trying to solve a problem.
show ip urlfilter statistics
Shows Filtering Service communication statistics, including:
*
Number of requests sent to Filtering Service
*
Number of responses received from Filtering Service
*
Number of requests pending in the system
*
Number of requests failed
*
Number of URLs blocked
debug ip urlfilter {function-trace/detailed/events}
Displays debugging information from the URL filter system.
 
Parameter
Description
function-trace
Enables the system to print a sequence of important functions that get called in this feature.
detailed
Enables the system to print detailed information about various activities that occur in this feature.
events
Enables the system to print various events, such as queue events, timer events, and socket events.
 

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Integrating Forcepoint URL Filtering with Cisco > Cisco IOS executable commands
Copyright 2022 Forcepoint. All rights reserved.