Go to the table of contents Go to the previous page Go to the next page
Integrating Forcepoint URL Filtering with TMG > Troubleshooting integration with Forefront TMG
Troubleshooting integration with Forefront TMG
Deployment and Installation Center | Forcepoint URL Filtering
SecureNAT clients are not receiving the correct policy
If you are using non-web proxy clients (for example, Firewall Client with proxy server disabled, or SecureNAT clients) with TMG, additional configuration of the ISAPI filter is required. Follow the instructions in Configuring for TMG using non-web-proxy clients.
No policy enforcement occurs after the plug-in is installed
If users requests are not being handled properly after the ISAPI Filter plug-in has been installed on the Forefront TMG machine, the plug-in may not be able to communicate with Filtering Service.
Verify that the ISAPI Filter plug-in is using the correct Filtering Service information.
1.
Go to the Windows system32 directory and open the wsMSP.ini file.
2.
Under [initSection], check the EIMServerIP and EIMServerPort parameters (these are the Filtering Service IP address and port, respectively). For example:
[initSection]
EIMServerIP=10.203.136.36
EIMServerPort=15868
The default port is 15868.
 

Go to the table of contents Go to the previous page Go to the next page
Integrating Forcepoint URL Filtering with TMG > Troubleshooting integration with Forefront TMG
Copyright 2023 Forcepoint. All rights reserved.