Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page
Setting Up V-Series Appliances > Set up the appliance hardware > Serial port activation
Serial port activation
Deployment and Installation Center | Web and Email Protection Solutions | v8.2.x
Applies to:                                                                                                          
*
TRITON AP-WEB and Web Filter & Security, v8.2.x
*
TRITON AP-EMAIL, v8.2.x
*
V-Series appliances, v8.2.x
IMPORTANT: This topic has not yet been fully updated for Version 8.3. Those updates will be added soon.
After hardware setup, connect directly to the appliance through the serial port or the monitor and keyboard ports. For serial port activation, use:
*
9600 baud rate
*
8 data bits
*
no parity
The activation script, called firstboot, runs when you start the appliance.
See Perform initial command-line configuration.
After firstboot is run and the command-line shell is exited, accessing the appliance command-line shell requires the admin credentials ('admin' and the password you set during firstboot).

Go to the table of contents Go to the previous page Go to the next page
Setting Up V-Series Appliances > Set up the appliance hardware > Serial port activation
Copyright 2016 Forcepoint LLC. All rights reserved.