Go to the table of contents Go to the previous page Go to the next page
Web Security Deployment Recommendations > Hardware recommendations for standalone Web Security deployments
Hardware recommendations for standalone Web Security deployments
Deployment and Installation Center | Web Security Solutions | Version 7.7.x
 
In standalone deployments, Network Agent (rather than Content Gateway or a third-party integration product) monitors network traffic and enables filtering of all protocols, including HTTP, HTTPS, and FTP.
In a standalone deployment, one or more Network Agent instances:
*
*
*
*
The table below provides hardware recommendations for standalone deployments, based on network size. System needs vary depending on the volume of Internet traffic. The table does not include information for the TRITON management server (see System requirements for this version).
The following baseline is used to create the recommendations:
*
*
*
 
Important 
If your network traffic exceeds these estimates, more powerful systems or greater distribution of components may be required.
 
Windows or Linux
Windows or Linux
Windows or Linux
To run both filtering and reporting on the same machine in the two smaller network sizes, increase the RAM to 6 GB (if supported by your operating system), and consider using a faster processor and hard drive to compensate for the increased load.
For networks with 2,500-10,000 users, at least two Network Agent instances, running on separate machines, are required. The machines should have:
*
*
Multiple Filtering Service machines may also be needed. Machine requirements depend on the number of users being monitored and filtered.

Go to the table of contents Go to the previous page Go to the next page
Web Security Deployment Recommendations > Hardware recommendations for standalone Web Security deployments
Copyright 2016 Forcepoint LLC. All rights reserved.