![]() |
![]() |
![]() |
![]() |
Web Security Gateway Anywhere (appliance-based) > TRITON management server as policy source for filtering-only appliance
|
TRITON management server as policy source for filtering-only applianceThis section discusses a scenario in which Policy Broker and Policy Server are installed on the TRITON management server and a Websense appliance (running in filtering only mode) uses the TRITON management server as its policy source.
1. Set up the appliance to run in full policy source mode.See Setting up the appliance for instructions.
2. Create a TRITON management server with both the Web and Data Security modules of the TRITON Unified Security Center.See Creating a TRITON Management Server for instructions. Important: while following those instructions, during the Web Security module installation, choose to install Policy Broker and Policy Server on the machine along with TRITON - Web Security, but do not choose to install Linking Service. Note that you can choose to install any of the other optional components as well, just not Linking Service.
3. Configure the appliance to filtering only mode, specifying the TRITON management server as the policy source.
4. On the TRITON management server, run the Websense installer again and add Linking Service. When asked for the IP address of Filtering Service, specify the C interface of the appliance.See Adding Web Security components for instructions on adding Linking Service.
![]() |
![]() |
![]() |
![]() |
Web Security Gateway Anywhere (appliance-based) > TRITON management server as policy source for filtering-only appliance
|