Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Host name and description
CLI Guide | Forcepoint Appliances | v8.5.x
show system host
View the appliance hostname and description.
show system host
Command modes
All products.
Usage guidelines
The hostname is set initially during the firstboot wizard.
Related commands
 
set system host
Change the hostname and description for the appliance.
set system host --name <name> [--description <description>]
 
Command modes
All products.
Usage guidelines
The hostname must be 1 to 60 characters long.
*
*
*
*
For Web mode appliances where Content Gateway will be configured to perform Integrated Windows Authentication (IWA), the hostname cannot exceed 11 characters, excluding the domain name.
In addition, if the hostname is changed after the appliance has been joined to a domain, IWA will immediately stop working and will not work again until the domain is unjoined and then rejoined with the new hostname. For more information, see the Content Gateway Manager Help.
The description is optional and may contain up to 100 characters.
Examples
(config)# set system host --name fp-apwebl.example.com --description "New York gateway."
Related commands
 

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Copyright 2020 Forcepoint. All rights reserved.