Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configure virtual IP addresses
Multiple virtual IP addresses can be configured on E1 or E2.
*
*
*
*
Multiple virtual interfaces can be helpful to support multiple domains and/or a large volume of outbound traffic.
setvirtualip
Set the virtual IP address for the Email module.
setvirtualip --action <list|add|delete> --interface <eth0|eth1> --ip <ip_address>
 
Command modes
Forcepoint Email Security. Not supported in Azure.
Examples
(config)(Email)# setvirtualip --action add --interface eth1 --ip 10.206.143.3
Related commands
 
migrate interactive
Move the configuration and email datastore to a new appliance.
migrate interactive
Command modes
Forcepoint Email Security.
Usage guidelines
Interactive mode is a step-by-step guided procedure that requires user input during the migration process.
Examples
(config)(Email)# migrate interactive
Related commands
 
migrate silent
Move the configuration and email datastore to a new appliance.
migrate silent --host <hostname> --mode <Azure|On-Premises> --subscription <subscription_key>
 
Enter Azure if you are migrating to a new Azure appliance, or On-Premises if you are migrating to a new on-premises appliance.
Usage guidelines
Forcepoint Email Security only
Examples
On-premises migration:
(config)(Email)# migrate silent --host 10.206.143.3 --mode On-Premises
Azure migration:
(config)(Email)# migrate silent --host 10.206.143.3 --mode Azure --subscription ABCDEFGH1
Related commands
 

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Copyright 2020 Forcepoint. All rights reserved.