Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Forcepoint Appliances Command Line Interface > Forcepoint DLP Analytics Engine module commands
Forcepoint DLP Analytics Engine module commands
CLI Guide | Forcepoint Appliances | v8.5.x
The appliance CLI includes certain commands that are specific to Forcepoint DLP Analytics Engine operations.
Use the Analytics Engine command set to perform the following tasks:
*
Register the appliance to the Forcepoint Management Server
*
Display configuration information
These commands require that you be logged in to the analytics-engine module CLI as shown in the login command.
login analytics-engine
Log on to the Forcepoint DLP analytics-engine module CLI.
login analytics-engine
Command modes
Forcepoint DLP Analytics Engine.
Usage guidelines
You must be in config mode to elevate to the DLP analytics-engine module CLI.
Examples
(config)# login analytics-engine
(config)(analytics-engine)#
Command history
Added in version 8.5.
Related commands
 
Command
Description
register
Re-register the appliance after the IP or hostname of the appliance of the Forcepoint Management Server have changed.
show manager info
Display Forcepoint DLP Analytics Engine configuration information.
register
Re-register the appliance after the IP or hostname of the appliance or the Forcepoint Management Server have changed.
register --ip <ip_address> --username <username> --password <password>
 
Parameter
Description
ip
IP address of the Forcepoint Management Server.
username
Username of the Forcepoint DLP administrator.
password
Password for the Forcepoint DLP administrator.
Command modes
Forcepoint DLP Analytics Engine.
Usage guidelines
All three parameters are required.
Examples
(config)(analytics-engine)# register --ip 10.10.10 --username jsmith --password 12345
Related commands
 
Command
Description
login analytics-engine
Log on to the DLP analytics-engine module CLI.
show manager info
Display Forcepoint DLP Analytics Engine configuration information.
show manager info
Display Forcepoint DLP Analytics Engine configuration information.
show manager info
Usage guidelines
Forcepoint DLP Analytics Engine only
Examples
(config)(analytics-engine)# show manager info
Manager IP: 10.10.10.1
Username: admin
Related commands
 
Command
Description
login analytics-engine
Log on to the DLP analytics-engine module CLI.
register
Re-register the appliance after the IP or hostname of the Forcepoint Management Server have changed.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Forcepoint Appliances Command Line Interface > Forcepoint DLP Analytics Engine module commands
Copyright 2020 Forcepoint. All rights reserved.