Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Appliance Configuration > V-Series appliance routing configuration > Working with V-Series appliance component routes
Working with V-Series appliance component routes
Help | V-Series Appliance | v8.2.x
Adding a component route
1.
In the Component Route section of the Configuration > Routing page, click Add.
2.
Select a Module from the drop-down list.
*
Only modules installed on the appliance are listed.
*
The Network Agent module never appears in the list.
3.
Use the Destination Network field to specify the subnet IP address for which traffic will be routed.
4.
Enter the Subnet mask for the destination subnet.
5.
Click Add Route.
Deleting a component route
1.
In the Component Routes section, select the routes to be deleted.
*
To select 1 route, click the box to the left of the entry you want to delete.
*
To select multiple entries, click the box to the left of each entry you want to delete.
*
To delete all routes, click the box to the left of the label Module.
2.
Click Delete.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Appliance Configuration > V-Series appliance routing configuration > Working with V-Series appliance component routes
Copyright 2016 Forcepoint LLC. All rights reserved.