![]() |
![]() |
![]() |
![]() |
V-Series Appliance Configuration > V-Series appliance alerting > Enable SNMP polling (monitoring) on V-Series appliances
|
1.
|
On the Setup tab of the Configuration > Alerting page in the Appliance manager, under Monitoring Server, click On.
|
2.
|
Select the SNMP version (v1, v2c, or v3) used in your network.
|
![]() |
![]() |
If you selected v3, select the Security level (None, Authentication only, or Authentication and Encryption) used in your network, and the User name to associate with SNMP communication.
|
4.
|
If you selected a security level that includes authentication, also enter and confirm the Password for the selected user name, then select the Authentication protocol (MD5 or SHA).
|
5.
|
If you selected authentication and encryption, select the Encryption protocol (DES or AES), and then enter and confirm the Encryption key used for encryption.
|
6.
|
Click OK to implement your changes.
|
![]() |
![]() |
![]() |
![]() |
V-Series Appliance Configuration > V-Series appliance alerting > Enable SNMP polling (monitoring) on V-Series appliances
|