Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Appliance Configuration > V-Series appliance network interface configuration > Configuring Master Database downloads to use P1
Configuring Master Database downloads to use P1
Help | V-Series Appliance | v8.2.x
By default, Filtering Service uses the C interface for full Master Database downloads, real-time database updates, and real-time security updates.
In TRITON AP-WEB deployments, you may be able to instead route database downloads through the P1 interface. This involves configuring Filtering Service to perform the download via the Content Gateway proxy.
 
* 
Important 
Database download settings are shared by all Filtering Service instances that connect to the same Policy Server instance. For that reason, this procedure may not be appropriate in all deployments (for example, deployments where server-based and appliance-based instances of Filtering Service share the same Policy Server).
Verify which Filtering Service instances will be affected before making this change.
Use the following steps to update your database download settings:
1.
Log on to the Web module of the TRITON Manager and connect to the Policy Server instance for the Filtering Service instance that you want to update.
2.
Navigate to the Settings > General > Database Download page.
3.
Under Proxy Server or Firewall, mark the Use proxy server or firewall box.
4.
Enter the P1 virtual interface (169.254.254.1).
5.
Make sure that the default port (8080) is shown.
6.
If Content Gateway is configure to use IWA or NTLM authentication, mark Use authentication and provide a valid user name and password.
7.
Click OK, then Save and Deploy to cache and save your changes.
8.
From the Status > Dashboard page (still in the Web module of the TRITON Manager), click Database Download.
9.
Select the appropriate Filtering Service instance, then click Update.
The Master Database is downloaded via the P1 interface.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Appliance Configuration > V-Series appliance network interface configuration > Configuring Master Database downloads to use P1
Copyright 2016 Forcepoint LLC. All rights reserved.