Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Overview > V-Series appliance network bandwidth
V-Series appliance network bandwidth
Help | V-Series Appliance | v8.2.x
The Status > Network Bandwidth page provides information about throughput on the appliance network interfaces listed here:
*
Appliance Controller Interface (C)
*
Content Gateway Interface (P1) or (P1 and E1)
*
Content Gateway Interface (P2) or (P2 and E2)
*
Network Agent Interface (N)
*
TRITON AP-EMAIL (E1) or (E1 and P1)
*
TRITON AP-EMAIL (E2) or (E2 and P2)
Interfaces E1 and E2 are included on the V10000 models only. The disposition of P1, P2, E1 and E2 is dependent on the modules installed or the configuration applied. For information about configuring the interfaces, see V-Series appliance network interface configuration. The bandwidth display includes them only if they are enabled.
For each interface, the following information is displayed for the previous 60 seconds:
*
Inbound/Outbound
*
current megabits per second, inbound and outbound, on the interface
*
maximum bandwidth capacity in megabits per second
*
Bandwidth Statistics
*
total megabits of data received and sent
*
total number of packets received and sent
*
packets dropped, inbound and outbound
*
total errors, inbound and outbound
*
rate in megabits per second, inbound and outbound

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Overview > V-Series appliance network bandwidth
Copyright 2016 Forcepoint LLC. All rights reserved.