Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Overview > Management consoles > Disabling and enabling password logon
Disabling and enabling password logon
Help | V-Series Appliance | Version 8.0.x
V-Series console password logon can be disabled to allow only two-factor authentication or single sign-on access from the TRITON console.
To disable appliance password logon:
1.
Set up single sign-on in the TRITON console.
2.
If two-factor authentication will be used, set up two-factor authentication in the TRITON console.
3.
Access the appliance Command Line Interface and log on with the admin credentials.
4.
At the command line, enter:
password-logon disable
5.
Log off and verify that direct logon is disabled by entering the IP address of the Logon Portal in your browser. The Logon Portal should not include links to the V-Series console or Content Gateway manager.
To re-enable password logon for all administrators:
1.
Access the appliance Command Line Interface and log on with the admin credentials.
2.
At the command line, enter:
password-logon enable
 
* 
Note 
If for some reason the appliance loses its registration with the TRITON console, password login is automatically re-enabled.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
V-Series Overview > Management consoles > Disabling and enabling password logon
Copyright 2016 Forcepoint LLC. All rights reserved.