Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuration > System configuration
System configuration
Help | V-Series Appliance | Version 8.0.x
Use the Configuration > System page to:
*
*
*
 
Important 
If any Websense services are running, stop all Websense services before changing the time. Then, reset the time and make certain that the time is consistent across all servers running Websense services. Finally, restart Websense services.
*
Use the Time zone list to select the time zone to be used on this system.
GMT (Greenwich Mean Time), the default, is also known as UTC (Universal Time, Coordinated). Other time zones are calculated by adding or subtracting from GMT. GMT is sometimes chosen to provide a common time stamp for geographically distributed systems.
*
Use the Time and date radio buttons to indicate how you want to set the date.
Time is set and displayed using 24-hour notation.
*
To synchronize with an Internet Network Time Protocol (NTP) server (www.ntp.org.), select the Automatically synchronize option and enter the address of a primary NTP server. The secondary and tertiary fields are optional.
 
Important 
If interface C on this appliance is not connected to the Internet, then you must provide a way for interface C to reach an NTP server. One solution is to install an NTP server on the local network where interface C can reach it.
*
To set the time yourself, select the Manually set option and change the value in the Date and Time fields. Use the format indicated below the entry field.
*
Click OK to apply and save the changes.
*
Set the appliance hostname, or system name (1 - 60 characters long).
*
*
*
 
Important 
For more information, see the section titled Integrated Windows Authentication in Content Gateway manager Help.
*
Create or edit a unique appliance description to help you identify and manage the system, particularly when there are multiple appliances deployed in a cluster.
The description is displayed in the appliance list in the TRITON console when the appliance is added there.
In each section that allows changes, OK saves and applies the new values. Cancel discards changes and restores entry field values to their current settings.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuration > System configuration
Copyright 2016 Forcepoint LLC. All rights reserved.