Websense Security Blade Manager Help
X-Series v7.6.4

Go to the table of contents Go to the previous page Go to the next page Go to the index View or print as PDF
Configuration > X10G security blade alerting > Enable specific alerts for an X10G security blade

The security blade can send traps for each of its modules: Appliance Controller, Content Gateway, Web Security, and Network Agent. The Alerts tab of the Configuration > Alerting page lists the alerts associated with only the modules that you have enabled.
*
The hardware or software Event that triggers the alert (for example, a network interface link going down or coming up, or a Websense service stopping).
*
The Threshold, if applicable, that defines the alert condition (for example, CPU usage exceeding 90%, or free disk space reaching less than 10% of the total disk size).
*
The Type of alert (system resource or operational event).
To enable all alerts for a module, select the check box next to SNMP in the table header. All check boxes in the column are selected.
Otherwise, mark the check box next to an event name to enable SNMP alerts for that event. To disable alerts for an event, clear the associated check box.


Go to the table of contents Go to the previous page Go to the next page Go to the index View or print as PDF
Configuration > X10G security blade alerting > Enable specific alerts for an X10G security blade