Websense Security Blade Manager Help
X-Series v7.6.4

Go to the table of contents Go to the previous page Go to the next page Go to the index View or print as PDF

Sometimes it is necessary to change the C interface IP address. What is affected and what must be done depends on the configuration of your security blades and the details of your deployment. The number of activities that must be performed and the service disruption can be significant. If possible, retain the current C interface IP address.
In most cases, off-chassis components that depend on or directly service a security blade should be uninstalled prior to changing the C interface IP address and reinstalled after the IP address change is completed. These components include:
Important 
It is strongly recommended that you back up your security blade(s) and affected off-chassis components before making any changes.
Scenario 1: Multiple security blades in a cluster, Web Security Gateway with off-chassis TRITON Unified Security Center and off-chassis Log Server
3.
On the TRITON Unified Security Center host, uninstall TRITON Unified Security Center and associated components (see the component list, above). Make a list of uninstalled components.
4.
Document the Policy Source settings of all security blades in the cluster and then on the User directory and filtering and Filtering only blades, change the policy source setting to Full policy source.
6.
On each of the secondary security blades, change the policy source setting from Full policy source to the original setting, pointing the blade to the new Full policy source C interface IP address.
8.
On the Log Server host, change the IP address of the Policy Server entry in websense.ini to the new C interface IP address and restart Log Server.
1.
Uninstall off-chassis components that are registered to the User directory and Filtering security blade whose C interface IP address will change.
2.
Temporarily make Filtering only security blades that depend on the User directory and Filtering security blade whose C interface IP address will change, Full policy source security blades.
4.
Return the policy source setting of the Filtering only security blades to Filtering only, pointing them to the new User directory and Filtering C interface IP address.
For detailed step-by-step instructions, go to the Websense Technical Library and search for the article titled Changing the C interface IP address: step-by-step.
Scenario 2: Multiple security blades in a cluster, Web Security Gateway with off-chassis Policy Broker and off-chassis TRITON Unified Security Center
Note 
3.
Document the Policy Source settings of all security blades in the cluster and then change the policy source setting of each to Full policy source.
5.
Return the policy source settings of the security blades to their original mode, pointing them to the new C interface IP address of a changed security blade if appropriate (if the blade is a Filtering only blade and the C interface change was to the User directory and Filtering security blade it pointed to).
For detailed step-by-step instructions, go to the Websense Technical Library and search for the article titled Changing the C interface IP address: step-by-step.


Go to the table of contents Go to the previous page Go to the next page Go to the index View or print as PDF