Interfaces tab

Security Appliance Manager Help | Forcepoint Appliances | v1.2

The Interfaces tab displays and allows you to edit network interface and domain name system (DNS) setting information.

Interface settings

The Network Interface Settings section of the Interfaces tab displays interface settings for Appliance Controller, Network Agent, Proxy, and Email.

Click the right arrow to expand each section and display its information, including:

State (Enabled/Disabled)

MAC address

Interface speed

Interface status

IPv4 or IPv6 address

Subnet mask

Subnet prefix

Default gateway

Interface bonding (On/Off)

Editing Interface settings

Note: The C interface IP address cannot be changed through FSAM. It can only be changed through the CLI, but this is not recommended. Changing the C interface IP address will affect communication with other TRITON components.

To edit the interface settings:

1.  Expand the section for which you want to edit the settings.
The interface settings display.

2.  Click the Edit button at the bottom of the section.
The interface settings display as editable.

3.  Edit the settings using the toggle buttons, drop-down menus, or editable fields.

4.  Click the Save button.

For more information about interface settings, refer to the Forcepoint Appliances Getting Started Guide.

DNS settings

The DNS Settings section of the Interfaces tab displays the DNS settings for the Appliance Controller, Network Agent, Proxy, and Web Security.

Click the right arrow to expand each section and display DNS information.

Editing DNS settings

To edit the DNS settings:

1.  Expand the section for which you want to edit the settings.
The DNS settings display.

2.  Click the Edit button at the bottom of the section.
The DNS settings display as editable.

3.  Edit the primary, secondary, and tertiary DNS settings by entering the information in the appropriate fields.

4.  Click the Save button.