This article describes how to use Net-SNMP with software installations of Content Gateway (not V-Series appliances) to monitor Content Gateway processes. It assumes that the reader is familiar with SNMP.
For information about using SNMP with V-Series appliances, please contact Websense Technical Support.
If you are not familiar with SNMP, an introductory article can be found in Wikipedia.
An essential resource and the location of Net-SNMP software
is www.net-snmp.org.
For documentation, go to: http://net-snmp.sourceforge.net/docs/man/.
To use SNMP with Content Gateway you must:
* Install Net-SNMP RPMs
* Configure snmpd.conf to monitor Content Gateway processes
and send traps to the SNMP Manager
* Verify the configuration