Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Content Gateway Security > Controlling client access to the proxy
Controlling client access to the proxy
Help | Content Gateway | v8.4.x
Administrators can configure Content Gateway to allow only certain clients to use the proxy.
*
When this configuration is in place, only clients whose IP address is included in the ip_allow.config file can access the proxy.
*
By default, clients from any IP address (0.0.0.0 - 255.255.255.255 and ::-ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) can access the proxy.
To restrict client access to the proxy:
1.
In the Content Gateway manager, go to the Configure > Security > Connection Control page.
2.
Click Edit File to open the configuration file editor for the ip_allow.config file.
3.
To add a new rule:
a.
Use the IP Action drop-down list to indicate whether to allow (ip_allow) or deny (ip_deny) requests from the specified IP address or range.
b.
Enter a Source IP address or range.
c.
Click Add.
4.
To edit an existing rule:
a.
Select a rule in the list at the top of the page.
b.
Make changes as needed.
c.
Click Set.
5.
Click Apply to save the information, and then click Close.
 
* 
Note 
If an unauthorized client tries to access Content Gateway, a message is displayed in their browser, indicating that the requested content cannot be obtained.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Content Gateway Security > Controlling client access to the proxy
Copyright 2017 Forcepoint. All rights reserved.