Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Transparent Proxy and ARM > Transparent interception strategies > Transparent interception with WCCP v2 devices > Enabling WCCP v2 in Content Gateway
Enabling WCCP v2 in Content Gateway
Help | Content Gateway | v8.4.x
Related topics:
*
Configuring WCCP v2 routers
*
Configuring service groups on the WCCP device
*
Enabling WCCP processing for a service group
*
Enabling WCCP v2 security on the router
After you have configured your WCCP v2 routers, these steps remain:
1.
Enabling WCCP in the Content Gateway Manager:
a.
Go to the Configure > My Proxy > Basic > General tab.
b.
Under Features > Networking, locate WCCP and click On, then Apply. Do not restart Content Gateway.
2.
Configuring service groups in the Content Gateway manager.
3.
Restarting Content Gateway.
 
* 
Important 
Before you restart Content Gateway, make sure that your configuration meets the following requirements:
*
Cisco IOS devices are running a very recent version of IOS with all appropriate patches applied.
*
WCCP routers are programmed with the correct service groups and other features.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Transparent Proxy and ARM > Transparent interception strategies > Transparent interception with WCCP v2 devices > Enabling WCCP v2 in Content Gateway
Copyright 2017 Forcepoint. All rights reserved.