Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Installing Remote Filtering Components > Preparing for installation
Preparing for installation
Deploying the Remote Filter Module | Forcepoint URL Filtering | v8.4.x, v8.5.x
Before installing remote filtering components, configure the firewall between the machine intended for Remote Filtering Server and the Policy Broker, Policy Server, and Filtering Service machine or machines to permit communication over the following ports.
Some of these ports must be open for installation, but can be closed afterward, as noted. Others must stay open for remote filtering to function properly.
Most organizations also have a firewall between Remote Filtering Server and Remote Filtering Clients outside the network. This firewall must be configured as follows to enable remote filtering to function properly.
You can configure the external firewall before or after installing Remote Filtering Server and deploying Remote Filtering Clients.
Open this external communication port on the external firewall. This enables Remote Filtering Server to accept requests from Remote Filtering Clients outside the network.
Close access to the internal communication (heartbeat) port on the external firewall.
When your environment is prepared, continue with the appropriate topic:
*
*

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Installing Remote Filtering Components > Preparing for installation
Copyright 2022 Forcepoint. All rights reserved.