Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Transparent Proxy and ARM > Transparent interception strategies > Transparent interception with WCCP v2 devices > Configuring WCCP v2 routers
Configuring WCCP v2 routers
Help | Content Gateway | Version 8.2.x
It is strongly recommended that you consult the documentation and the manufacturer's support site for information regarding configuration and performance of your WCCP v2 device.
Most devices should be configured to take best advantage of hardware-based redirection.
With Cisco devices, the most recent version of IOS is usually the best.
To prepare WCCP v2 devices for use with the proxy:
1.
Configure one or more service groups for the protocols you intend to use. A service group can handle one or multiple protocols. See Configuring service groups on the WCCP device.
2.
Configure the router to enable WCCP processing for these service groups. See Enabling WCCP processing for a service group.
3.
Optionally, enable router security. Router security must also be enabled for the service group in Content Gateway. See Enabling WCCP v2 security on the router.
 
* 
Note 
For instructions on configuring your specific router, please refer to the documentation provided by your hardware vendor. For Cisco routers, see http://www.cisco.com/cisco/web/psa/default.html?mode=prod and search for your IOS and device version, for example, IOS 12.4.
4.
When you are done configuring the router, you must also configure and enable WCCP in the Content Gateway manager. See Enabling WCCP in the Content Gateway manager.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Transparent Proxy and ARM > Transparent interception strategies > Transparent interception with WCCP v2 devices > Configuring WCCP v2 routers
Copyright 2016 Forcepoint LLC. All rights reserved.