Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Troubleshooting > Network Agent issues > Network Agent is not monitoring any NICs
Network Agent is not monitoring any NICs
Administrator Help | TRITON AP-WEB and Web Filter & Security | Version 8.2.x
Network Agent must be associated with at least one network interface card (NIC) to monitor network traffic.
If you add or remove network cards from the Network Agent machine, you must update your Network Agent configuration.
1.
Open the Web module of the TRITON Manager, and select the Settings tab
2.
In the left navigation pane, under Network Agent, place the mouse over the Global menu entry until one or more IP addresses is displayed in a submenu.
3.
Select the IP address of the Network Agent machine.
4.
Verify that all NICs for the selected machine are listed.
5.
Verify that at least one NIC is set to monitor network traffic.
See Configuring Network Agent local settings for more information.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Troubleshooting > Network Agent issues > Network Agent is not monitoring any NICs
Copyright 2016 Forcepoint LLC. All rights reserved.