Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Security > Controlling access to the Content Gateway manager > Setting the administrator ID and password
Setting the administrator ID and password
Help | Content Gateway | Version 8.0.x
During installation, you assign a password that controls administrative access to the Content Gateway manager. A user who logs on to the Content Gateway manager using the correct ID and password can view all the statistics on the Monitor tab and change any configuration options on the Configure tab.
You can change the administrator ID and password at any time.
1.
Navigate to the Configure > My Proxy > UI Setup > Login tab.
2.
Make sure that Basic Authentication is enabled.
When Basic Authentication is disabled, any user can access the Content Gateway manager unless you have set up a list of IP addresses that are denied access (see Controlling host access to the Content Gateway manager).
3.
To change the current administrator ID, type a new ID in the Login field of the Administrator section.
4.
To change the current password, type the current password in the Old Password field. Type the new password in the New Password field, and then retype the new password in the New Password (Retype) field.
If you have forgotten the current administrator password, see Accessing the Content Gateway manager if you forget the master administrator password.
5.
Click Apply.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Security > Controlling access to the Content Gateway manager > Setting the administrator ID and password
Copyright 2016 Forcepoint LLC. All rights reserved.