Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuration Files > records.config > ICAP
ICAP
Help | Content Gateway | Version 7.8.x
 
Configuration Variable
Data Type
Default Value
Description
proxy.config.icap.
enabled
INT
0
Enables (1) or disables (0) ICAP support with Websense Data Security Suite (DSS). See Working With Websense Data Security.
proxy.config.icap.
ICAPUri
STRING
NULL
Specifies the Uniform Resource Identifier for the ICAP service.
A backup server can be specified in a comma-separated list.
Obtain the identifier from your DSS administrator. Enter the URI in the following format:
icap://hostname:port/path
For hostname, enter the IP address or hostname of the DSS Protector appliance.
The default ICAP port is 1344.
Path is the path of the ICAP service on the host machine.
For example:
icap://ICAP_machine:1344/opt/icap_services
You do not need to specify the port if you are using the default ICAP port 1344.
proxy.config.icap.
FailOpen
INT
1
Set to:
*
1 to allow traffic when the ICAP server(s) is down
*
0 to send a block page if the ICAP server(s) is down
proxy.config.icap.
BlockHugeContent
 
INT
0
Set to:
*
0 to send a block page if a file larger than the size limit specified by Data Security Suite is sent. The default size limit in DSS is 12 MB.
*
1 to allow traffic
proxy.config.icap.
AnalyzeSecureContent
INT
1
Set to:
*
0 if decrypted traffic should be sent directly to its destination.
*
1 if decrypted traffic should be sent to Data Security Suite for analysis.
proxy.config.icap.
AnalyzeFTP
INT
1
When enabled (1), send native FTP upload file transfers to ICAP server for analysis.
proxy.config.icap.
ActiveTimeout
INT
5
The read/response timeout in seconds. The activity is considered a failure if the timeout is exceeded.
proxy.config.icap.
RetryTime
INT
5
The recovery interval, in seconds, to test whether a down server is back up.
proxy.config.icap.
LoadBalance
 
INT
1
When to ICAP servers are specified, set to:
*
1 to distribute requests to all available servers
*
0 to distribute requests to only the primary server.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuration Files > records.config > ICAP
Copyright 2016 Forcepoint LLC. All rights reserved.