Documentation | Support

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuration process
Configuration process
Forcepoint IPsec Advanced Guide | Forcepoint Web Security Cloud
This section details the end-to-end configuration process for setting up your device for IPsec Advanced connectivity.
First steps
You will need either the public IP address, or DNS hostname of the device, to use as the IKE ID:
*
Use the public (egress) IP address of the edge device as the IKE ID if the public IP address is static.
*
Use the DNS hostname (FQDN) of the device, with IKEv2, if your device has a dynamic IP address.
If you are a hybrid customer, contact Technical Support to obtain a login to the cloud portal. See Using IPsec with the hybrid service.
The configuration process is covered step-by-step in Tunnel configuration.
See Recommended settings and best practices for details of the recommended and supported device configuration settings for IPsec Advanced. The section also details device configuration best practices.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Configuration process
Copyright 2022 Forcepoint. All rights reserved.