Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Domain-based routes
Administrator Help | Forcepoint Email Security | Version 8.5.x
Delivery routes based on domain groups are examined after defined user directory-based routes for a match with an email message recipient. If a match is made with a user directory-based route, domain-based routes are not examined for matches.
 
Important 
The Protected Domain group defined on the page Settings > Users > Domain Groups should not be used to configure delivery routes if you need to define domain-based delivery routes via multiple SMTP servers.
Adding a domain-based route
Use the following steps to add a domain-based delivery route on the page Settings > Inbound/Outbound > Mail Routing:
1.
Click Add.
The Add Domain-based Route page displays.
2.
In the field Name, enter a name for your new route.
3.
From the pull-down menu Route order, select an order number to determine the route's scanning order.
4.
From the pre-defined domains in the pull-down menu Domain group, select a destination domain.
Default is Protected Domain. Information about the domain group appears in the Domain details box.
To edit your selected domain group, click Edit to open the Edit Domain Group page. See Editing a domain group.
5.
*
*
If you select this option, an SMTP Server List opens.
a.
Click Add.
The Add SMTP Server dialog box displays.
b.
c.
Mark the check box Enable MX lookup to enable the MX lookup function.
 
Important 
*
Mark the check box Enable MX lookup for message delivery based on the hostname MX record.
d.
If a single route has multiple defined server addresses, mail is delivered in order of server preference. When multiple routes have the same preference, round robin delivery is used.
You may enter no more than 16 addresses in the SMTP Server List.
6.
a.
Enable email traffic to use opportunistic TLS protocol; select Use opportunistic Transport Layer Security (TLS).
b.
Enter the appropriate user name and password in the Authentication Information box. You must use the SMTP server IP address delivery method for users to authenticate.

Go to the table of contents Go to the previous page Go to the next page View or print as PDF
Copyright 2022 Forcepoint. All rights reserved.