Adding an IP address group

Administrator Help | TRITON AP-EMAIL | Version 8.2.x

Click Add on the Settings > Inbound/Outbound > IP Groups page to open the Add IP Address Group page. Use the following procedures to add an IP address group:

Enter a name for the new IP address group in the IP Address Group Name field.

Enter a brief description of your IP address group.

Add a predefined IP address group by clicking Browse next to the IP address file field and navigating to the desired text file. The file format should be 1 IP address per line, and its maximum size is 10 MB.


	Note The default Encryption Gateway IP address group supports only the entry of individual IP addresses. Subnet address entries are considered invalid and are not accepted for this IP address group. Subnet addresses may be entered for other default and custom IP address groups.

You can also create an IP address group by entering an individual IP address in the IP Address box and clicking the arrow button to add the information to the Added IP Addresses box on the right.

Click OK.

After you finish adding your IP address entries, you can export the list to your local drive as a text file by clicking the Added IP Addresses Export button.

Remove an individual entry by selecting it in the Added IP Addresses box and clicking Remove.