Documentation | Support

Go to the table of contents Go to the previous page Go to the next page
Adding, Modifying, or Removing Components > Adding web protection components
Adding web protection components
Deployment and Installation Center | Web Protections Solutions | v8.4.x
 
* 
Important 
Do not add other web protection components to a Remote Filtering Server machine.
1.
To start the Forcepoint Security Installer:
*
If installation files were saved after the initial installation, use the Forcepoint Security Setup link (on the Start screen or in the Start > Forcepoint menu) to start the installer without having to re-extract files.
*
If the installation files were not saved, double-click the installer executable.
2.
In Modify Installation dashboard, click the Modify link for Web Protection Solutions.
The web protection component installer is started.
3.
On the Add Components screen, select Install additional components on this machine and click Next.
4.
On the Select Components screen, select the components to add and proceed as you would when performing a custom installation of web protection components. See Installing web protection components for instructions.
5.
When you are done adding web protection components, you are returned to the Modify Installation dashboard.

Go to the table of contents Go to the previous page Go to the next page
Adding, Modifying, or Removing Components > Adding web protection components
Copyright 2017 Forcepoint. All rights reserved.