Technical Library | Support

Go to the table of contents Go to the previous page Go to the next page
Integrating Web Security with Cisco > Cisco IOS executable commands
Cisco IOS executable commands
Deployment and Installation Center | Web Security Solutions | Version 7.8.x
Applies to:                                         
*
Web Filter, Web Security, and Web Security Gateway, v7.8.x
These Cisco IOS router commands allow you to view configuration data and filtering information. These settings cannot be saved into the startup configuration.
show ip urlfilter config
This command shows configuration information, such as number of maximum requests, allowmode state, and the list of configured Filtering Services.
Technical Support typically requests this information when trying to solve a problem.
show ip urlfilter statistics
This command shows statistics of the URL filtering feature, including:
*
Number of requests sent to Filtering Service
*
Number of responses received from Filtering Service
*
Number of requests pending in the system
*
Number of requests failed
*
Number of URLs blocked
debug ip urlfilter {function-trace/detailed/events}
This command enables the display of debugging information from the URL filter system.
 
Parameter
Description
function-trace
Enables the system to print a sequence of important functions that get called in this feature.
detailed
Enables the system to print detailed information about various activities that occur in this feature.
events
Enables the system to print various events, such as queue events, timer events, and socket events.
 

Go to the table of contents Go to the previous page Go to the next page
Integrating Web Security with Cisco > Cisco IOS executable commands
Copyright 2016 Forcepoint LLC. All rights reserved.