Initial Configuration > Initial configuration (all deployments)

Initial configuration (all deployments)

Applies to

Web Filter v7.6

Web Security v7.6

Web Security Gateway v7.6

Web Security Gateway Anywhere v7.6

Email Security Gateway v7.6

Data Security v7.6

In this topic

Ports

Antivirus configuration

Disable Enhanced Security Configuration in Internet Explorer

Accessing the TRITON Unified Security Center

Entering subscription key

SMTP server configuration

SQL Server 2008 R2 Express

Ports

Websense software components use certain ports by default to communicate with each other and the Internet. After installation, be sure to configure any firewall protecting the machine to allow communication on the ports used by the components you have installed. See Default ports.

Antivirus configuration

To avoid interference with the performance of Websense components, exclude certain Websense folders and files from antivirus scans. See Excluding Websense Files from Antivirus Scans.

Disable Enhanced Security Configuration in Internet Explorer

When using Internet Explorer, disable Enhanced Security Configuration to view all features in the TRITON Unified Security Center.

Windows Server 2008

1.	Open the Server Manager.

2.	Under Server Summary, in the Security Information section, click Configure IE ESC.

3.	In the Internet Explorer Enhanced Security Configuration dialog box, under Administrators, select the Off radio button, and then click OK.

Windows Server 2003

1.	Open Windows Add or Remove Programs.

2.	In Windows Add or Remove Programs, select Add/Remove Windows Components (in left pane).

3.	In the Windows Components Wizard, select Internet Explorer Enhanced Security Configuration.

4.	Click Next.

5.	Click Finish.

Accessing the TRITON Unified Security Center

Using a supported browser (see System Requirements), go to https://<IP address>:9443/triton. Where <IP address> is the IP address of the machine on which TRITON Unified Security Center is installed. If using the TRITON Unified Security Center installed on a Websense appliance (Web Security Gateway only) then use the IP address of the appliance's C interface.

Use the default admin account (password set during installation) to log on for the first time.

Entering subscription key

Enter your subscription key(s) as described below.

Web Security

At initial startup TRITON - Web Security prompts for a subscription key. The key you enter will automatically be applied to Content Gateway as well. See the TRITON - Web Security Help for more information.

Data Security

At initial startup TRITON - Data Security starts at the subscription key page. See the Initial Setup section of the TRITON - Data Security Help for more information.

Email Security

In TRITON - Email Security, enter the subscription key on the Settings > General > Subscription page. See the TRITON - Email Security Help for more information.

SMTP server configuration

It is recommended you specify an SMTP server to be used for system alert and password reset email. See the TRITON Unified Security Help for more information.

SQL Server 2008 R2 Express

If you installed SQL Server 2008 R2 Express, verify that SQL Server Browser service is running and TCP/IP is enabled.

1.	Launch SQL Server Configuration Manager (Start > All Programs > Microsoft SQL Server 2008 R2 > Configuration Tools > SQL Server Configuration Manager).

2.	In the tree pane, select SQL Server Service.

3.	In the properties pane, make sure SQL Server Browser is running and start mode is automatic.

Right-click to start the service or change its start mode.

4.	In the tree pane, select SQL Server Network Configuration > Protocols for <instance name>, where <instance name> is the default instance or TRITONSQL2K8R2X (or other instance name you specified).

5.	In the properties pane, make sure TCP/IP is enabled.

If not, right-click TCP/IP and enable it.

Initial Configuration > Initial configuration (all deployments)