Initial Configuration > Data Security initial configuration

Data Security initial configuration

Note  TRITON - Data Security may not be available immediately after installation. It takes a few minutes to initialize the system after it is first installed.

Applies to

Data Security v7.6

In this topic

SMTP Agent

ISA Agent

Crawler Agent

General Setup

SMTP Agent

If you installed this agent, you must deploy the it in the TRITON - Data Security. The easiest way to test your installation is using Outlook Express installed on the same machine as the SMTP agent.

See "Configuring the SMTP agent" in the TRITON - Data Security Help system.

Before cutting over the live mail flow, be sure to test relaying through all mail servers as described in Testing.

For information on configuring the SMTP agent for your existing email infrastructure, see Using the SMTP agent. For more information on configuring this agent, see "Configuring the SMTP agent" in the TRITON - Data Security Help system.

Testing

1.	Test relay access from the mail server to the Data Security MTA:

Send a test message from the central mail server to the SMTP agent MTA through telnet:

From the mail server, open a command line and execute the following commands:

telnet [DSS MTA ip/hostname] 25

HELO me

MAIL FROM:[email_address@local.domain]

RCPT TO:[your_address@websense.com]

DATA

Subject: testing DSS MTA

.

quit

Once you type the period and press enter you should get a "250 Ok:" message from the Data Security MTA. If you get any message other than 250 OK do a Google search for that SMTP message.

If you get a 250 OK, but do not receive your message in your corp address, continue to step 2.

2.	Test relay access from Data Security MTA Inbound to Outbound:

Send a test message from the SMTP agent server to its own Inbound SMTP Virtual Server through telnet:

From the SMTP agent server, open a command line and execute the following commands:

telnet localhost 25

HELO me

MAIL FROM:[email_address@local.domain]

RCPT TO:[your_address@websense.com]

DATA

Subject: testing DSS MTA

.

quit

Once you type the period and press enter you should get a "250 Ok:" message from the SMTP Virtual Server. If you get any message other than 250 OK do a Google search for that SMTP message. If you get a 250 OK, but do not receive your message in your corp address, check the Badmail/Queue directories for the inbound SMTP Virtual Server (C:\Inetpub\mailroot by default). If the folders are empty, continue to step 3.

3.	Test relay access from Data Security MTA to its own Outbound server:

Send a test message from the SMTP Agent server to its own Outbound SMTP Virtual Server through telnet:

From the SMTP agent server, open a command line and execute the following commands:

telnet localhost 10025

HELO me

MAIL FROM:[email_address@local.domain]

RCPT TO:[your_address@websense.com]

DATA

Subject: testing DSS MTA

.

quit

Once you type the period and press enter you should get a "250 Ok:" message from the SMTP Virtual Server. If you get any message other than 250 OK do a Google search for that SMTP message. If you get a 250 OK, but do not receive your message in your corp address, check the Badmail/Queue directories for the Outbound SMTP Virtual Server (C:\Inetpub\outbound by default). If the folders are empty, continue to step four.

4.	Test relay access from Data Security MTA to the next hop MTA:

Send a test message from the SMTP Agent server to the next hop MTA through telnet:

From the SMTP agent server, open a command line and execute the following commands:

telnet [next hop MTA/smarthost IP/hostname] 25

HELO me

MAIL FROM:[email_address@local.domain]

RCPT TO:[your_address@websense.com]

DATA

Subject: testing DSS MTA

.

quit

Once you type the period and press enter you should get a "250 Ok:" message from the next hop MTA. If you get any message other than 250 OK do a Google search for that SMTP message. If you get a 250 OK, but do not receive your message in your corp address, then there is some issue beyond the DSS MTA mail flow (i.e. delivery from next hop MTA to destination domain mail servers).

ISA Agent

If you installed this agent, you must deploy the it in TRITON - Data Security. To ensure that the ISA agent is properly installed and enabled in ISA, navigate to Web Filters in the ISA Management Console.

See "Configuring the ISA agent" in the TRITON - Data Security Help system.

Crawler Agent

If you installed this agent, you must deploy it in TRITON - Data Security. See "Configuring the crawler" in the TRITON - Data Security Help system.

General Setup

See the Initial Setup section of the TRITON - Data Security Help for information on the following topics:

Defining general system settings

Connection to directory services

System alerts

Setting up notifications

Notifications when policy breaches occur

Configuring Web attributes

Web DLP policies

Policies for particular Web sites

Policy owners

Configuring outbound and inbound attributes

Email policies

Creating a regulatory and compliance policy

Configuring system modules

Viewing Data Security modules

Configuring the protector

Deploying your settings

Initial Configuration > Data Security initial configuration