Configuring TRITON Infrastructure to new IP address, host name, or domain

Applies to

Websense Web Filter 7.6

Websense Web Security 7.6

Websense Web Security Gateway 7.6

Websense Web Security Gateway Anywhere 7.6

Websense Data Security 7.6

Websense Email Security Gateway 7.6

Websense Email Security Gateway Anywhere 7.6

Configuring TRITON Infrastructure to new IP address, host name, or domain

If you change the IP address, host name, or domain of the TRITON management server, TRITON Infrastructure's configuration must be modified to reflect the change.

 

Note  If SQL Server 2008 R2 Express is installed on the TRITON management server, completing these steps will not update it to a new IP address, host name, or domain. This must be done separately. See

1.	Launch the Websense installer.

If you chose to keep installer files the last time you ran the installer, you can launch it without re-extracting files by going to Start > All Programs > Websense > Websense TRITON Setup.

2.	In the installer, for TRITON Infrastructure, select the Modify link.

3.	Accept the defaults in the installer screens and click Next, until you reach the Server IP Address screen.

4.	If you changed the IP address of the TRITON management server, select the new IP address in the Server IP Address screen.

5.	If you changed the host name or domain of the TRITON management server, the installer will automatically detect the new settings and configure TRITON Infrastructure.

6.	Proceed through the remaining installer screens, accepting defaults, and click Finish.