Action and Syntax	Details
Resets the debug output logging level to the default (minimum output). set debugging --command reset --module <proxy|web|email>	Module: The module you are resetting. Command: The command being sent. Default: reset. Example: (config)# set debugging --command reset --module proxy
Runs the proxy content_line command. set proxy content_line --type <clear_cert|reread_config| set> --entry <variable_name> --value <variable_value>	Type: The action to apply. Entry: The name of a records.conf variable. See Content Gateway Help for information about content_line and records.config. Value: The value to set the variable to. Example: (config)# set proxy content_line --entry proxy.config.lm.display_reset_alarm --value 1 --type set
Starts, stops, or restarts the Content Gateway Policy Engine. set proxy policy_engine --command <start|stop|restart>	Command: The action to apply. Example: (config)# set proxy policy_engine --command stop
Resets the proxy password. set proxy password	This command overwrites the old proxy password and displays a new one. Example: (config)# set proxy password Output: Proxy password successfully reset: <new_password>
Enables or disables the specified Web protection service. set web control --command <enable|disable> --service <state_server| directory_agent>	Command: The action to apply. Service: The service to control. For information, see the following sections of the of the TRITON AP-WEB Administrator Help: Reporting components Policy Server, Filtering Service, and State Server Directory Agent and hybird user identification Example: (config)# set web control --command disable --service multiplexer
Retrieves the status of or enables/disables the caching of users. set web cache_users --command <enable|disable>	Command: The action to apply. Example: (config)# set web cache_users --command enable
Retrieves the status of or enables/disables the User Group IP Precedence. set web usr_grp_ip_prec --command <enable|disable>	Command: The action to apply. For more information, see the Prioritizing group and domain policies section of the TRITON AP-WEB Administrator Help. Example: (config)# set web usr_grp_ip_prec --command enable
Resets the email subscription. set email subscription_reset

Note  On an X10G, V5000, and VMware virtual appliance, substitute P1 for E1 and P2 for E2.

Action and Syntax	Details
Log on to the email-specific CLI. login email	You must be in the config mode to log on to the email-specific CLI. Example: (config)# login email (config)(Email)#
Moves the config and email store to a new appliance. migrate interactive	Example: (config)(Email)# migrate interactive
Moves the config and email store to a new appliance. migrate silent --host <host_name> --user <user_name>	Host: Host name or IP address User: User name. Example: (config)(Email)# migrate silent --host 10.206.143.3 --user jdoe
Set the virtual IP address for the Email module. setvirtualip --action <list|add|delete> --interface <eth0|eth1> --ip <ip_address>	Action: The action being implemented. Interface: The interface being configured. IP: The IP address. Example: (config)(Email)# setvirtualip --action add --interface eth1 --ip 10.206.143.3